Problems with DOS / Windows 95/98/ME

Previous  Next

General:

For FAT 16 partitions, the maximum partition size is 2 GB.
For MS-DOS up to version 4.x, only one primary partition at one time (boot image) may be visible. (However, it is not a problem to install several.).
It is possible to boot from the 2nd harddisk only if no primary partition is visible on the 1st harddisk.

 

Installation starting above 2 GB:

(works only with Window 95 and higher)

Set up type "0E" partition.
If other operating systems are to access this partition, type "0E" should perhaps be changed to "06" after the installation process.

 

Installation on second hard drive:

When installing on the second hard drive, the power has to be disconnected to the first hard drive during the installation process.

An alternative is to "manually" install DOS (with FORMAT, SYS, and COPY).

 

 

See also:

Partition Types

 

Problems (Overview)

Problems with Windows NT/2000/XP/2003/Vista

Problems with Linux

Problems with Hardware

Problems with Software